
⚠ All product names, trademarks, brands, and logos on this site are the property of their respective owners. Their use is for identification purposes only and does not imply any affiliation or authorization from the rights holders. We are not authorized dealers or distributors of the brand. The warranty is provided by us, not the original manufacturer.
EN29LV160CB-70TIP
EN29LV160CB-70TIP - Brand New EON IC Chips
- One-month free return and one year warranty.
- Full or Partial Refund, if the item is not as described
- Full Refund if you don't receive your order
GENERAL DESCRIPTION
The EN29LV160C is a 16-Megabit, electrically erasable, read/write non-volatile
flash memory, organized as 2,097,152 bytes or 1,048,576 words. Any byte can be
programmed typically in 8µs. The EN29LV160C features 3.0V voltage read and
write operation, with access times as fast as 70ns to eliminate the need for
WAIT states in high-performance microprocessor systems.
The EN29LV160C has separate Output Enable (OE#), Chip Enable (CE#), and Write
Enable (WE#) controls, which eliminate bus contention issues. This device is
designed to allow either single Sector or full chip erase operation, where
each Sector can be individually protected against program/erase operations or
temporarily unprotected to erase or program. The device can sustain a minimum
of 100K program/erase cycles on each Sector.
FEATURES
• 3.0V, single power supply operation
- Minimizes system level power requirements
• High performance
- Access times as fast as 70 ns
• Low power consumption (typical values at 5 MHz)
- 9 mA typical active read current
- 20 mA typical program/erase current
- Less than 1 μA standby current
• Flexible Sector Architecture:
- One 16-Kbyte, two 8-Kbyte, one 32-Kbyte, and thirty-one 64-Kbyte sectors
(byte mode)
- One 8-Kword, two 4-Kword, one 16-Kword and thirty-one 32-Kword sectors
(word mode)
• Sector protection :
- Hardware locking of sectors to prevent program or erase operations within
individual sectors
- Additionally, temporary Sector Group Unprotect allows code changes in
previously locked sectors.
• Secured Silicon Sector
- Provides a 128-words area for code or data that can be permanently
protected.
- Once this sector is protected, it is prohibited to program or erase within
the sector again.
• High performance program/erase speed
- Byte/Word program time: 8µs typical
- Sector erase time: 100ms typical
- Chip erase time: 4s typical
• JEDEC Standard program and erase commands
• JEDEC standard DATA# polling and toggle bits feature
• Single Sector and Chip Erase
• Sector Unprotect Mode
• Embedded Erase and Program Algorithms
• Erase Suspend / Resume modes: Read and program another Sector during Erase
Suspend Mode
• Triple-metal double-poly triple-well CMOS Flash Technology
• Low Vcc write inhibit < 2.5V
• minimum 100K program/erase endurance cycle
• Package Options
- 48-pin TSOP (Type 1)
- 48 ball 6mm x 8mm TFBGA
• Industrial Temperature Range
Shipping
| First item | Additional item | Service | Description |
|---|---|---|---|
| $0.00 | Free | Free Shipping | Estimated 15-30 business days via Registered Air Mail or others |
| $27.50 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
| $0.00 | Free | Buyer cooperating carrier | Using buyer's cooperating carrier. Buyer should create a shipping label and share it to us. And then we will call carrier for pickup |
| $38.00 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
Delivery
- The transportation time may be delayed due to customs clearance, local holidays or abnormal events.
- The estimated time is based on the fastest speed provided by commercial couriers (DHL, FedEx, UPS etc).
- The estimated time does not include the lead time of the item. The lead time of most items is 2–5 business days. If more than 5 working days are needed, we will manually confirm with you.
| Flag | Country | Express Delivery | Standard Delivery |
|---|---|---|---|
| United States | 3 - 5 days | 10-15 days | |
| Canada | 3 - 5 days | 10-20 days | |
| Mexico | 3 - 5 days | 10-17 days | |
| Germany | 3 - 5 days | 10-12 days | |
| Italy | 3 - 5 days | 10-15 days | |
| United Kingdom | 3 - 5 days | 10-12 days |
Estimated Delivery
This item requires 2-5 business days for processing before shipping after payment is confirmed. And depending on the destination and shipping method.
Return Policy
| Return window | Refund type | Return shipping |
|---|---|---|
| 60 days after receiving item | Money Back or Replacement | Buyer pays for return shipping |