
⚠ All product names, trademarks, brands, and logos on this site are the property of their respective owners. Their use is for identification purposes only and does not imply any affiliation or authorization from the rights holders. We are not authorized dealers or distributors of the brand. The warranty is provided by us, not the original manufacturer.
M28W160BT-100ZB6
M28W160BT-100ZB6 - Brand New STMicroelectronics IC Chips
- One-month free return and one year warranty.
- Full or Partial Refund, if the item is not as described
- Full Refund if you don't receive your order
SUMMARY DESCRIPTION
The M28W160B is a 16 Mbit (1 Mbit x 16) non-volatile Flash memory that can be
erased electrically at the block level and programmed in-system on a Word-by-
Word basis. These operations can be performed using a single low voltage (2.7
to 3.6V) supply. VDDQ allows to drive the I/O pin down to 1.65V. An optional
12V VPP power supply is provided to speed up customer programming.
The device features an asymmetrical blocked architecture. The M28W160B has an
array of 39 blocks: 8 Parameter Blocks of 4 KWord and 31 Main Blocks of 32
KWord. M28W160BT has the Parameter Blocks at the top of the memory address
space while the M28W160BB locates the Parameter Blocks starting from the
bottom. The memory maps are shown in Figure 6, Block Addresses.
Parameter blocks 0 and 1 can be protected from accidental programming or
erasure. Each block can be erased separately. Erase can be suspended in order
to perform either read or program in any other block and then resumed. Program
can be suspended to read data in any other block and then resumed. Each block
can be programmed and erased over 100,000 cycles.
Program and Erase commands are written to the Command Interface of the memory.
An on-chip Program/Erase Controller takes care of the timings necessary for
program and erase operations. The end of a program or erase operation can be
detected and any error conditions identified. The command set required to
control the memory is consistent with JEDEC standards.
FEATURES SUMMARY
■ SUPPLY VOLTAGE
– VDD = 2.7V to 3.6V Core Power Supply
– VDDQ= 1.65V to 3.6V for Input/Output
– VPP = 12V for fast Program (optional)
■ ACCESS TIME: 70, 85, 90,100ns
■ PROGRAMMING TIME
– 10µs typical
– Double Word Programming Option
■ COMMON FLASH INTERFACE
– 64 bit Security Code
■ MEMORY BLOCKS
– Parameter Blocks (Top or Bottom location)
– Main Blocks
■ BLOCK PROTECTION on TWO PARAMETER BLOCKS
– WP for Block Protection
■ AUTOMATIC STAND-BY MODE
■ PROGRAM and ERASE SUSPEND
■ 100,000 PROGRAM/ERASE CYCLES per BLOCK
■ ELECTRONIC SIGNATURE
– Manufacturer Code: 20h
– Top Device Code, M28W160BT: 90h
– Bottom Device Code, M28W160BB: 91h
Shipping
| First item | Additional item | Service | Description |
|---|---|---|---|
| $0.00 | Free | Free Shipping | Estimated 15-30 business days via Registered Air Mail or others |
| $27.50 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
| $0.00 | Free | Buyer cooperating carrier | Using buyer's cooperating carrier. Buyer should create a shipping label and share it to us. And then we will call carrier for pickup |
| $38.00 | Free | Expedited Shipping | Estimated delivery time is 3-5 business days, with some areas possibly taking 6-9 business days depending on the shipping address. The main courier companies include but are not limited to UPS, DHL, and FedEx. |
Delivery
- The transportation time may be delayed due to customs clearance, local holidays or abnormal events.
- The estimated time is based on the fastest speed provided by commercial couriers (DHL, FedEx, UPS etc).
- The estimated time does not include the lead time of the item. The lead time of most items is 2–5 business days. If more than 5 working days are needed, we will manually confirm with you.
| Flag | Country | Express Delivery | Standard Delivery |
|---|---|---|---|
| United States | 3 - 5 days | 10-15 days | |
| Canada | 3 - 5 days | 10-20 days | |
| Mexico | 3 - 5 days | 10-17 days | |
| Germany | 3 - 5 days | 10-12 days | |
| Italy | 3 - 5 days | 10-15 days | |
| United Kingdom | 3 - 5 days | 10-12 days |
Estimated Delivery
This item requires 2-5 business days for processing before shipping after payment is confirmed. And depending on the destination and shipping method.
Return Policy
| Return window | Refund type | Return shipping |
|---|---|---|
| 60 days after receiving item | Money Back or Replacement | Buyer pays for return shipping |