FH33J-19S-0.5SH(10)

■Features

1. Low-profile, small PCB mounting area
Narrow width of only 2.5 mm reduced the board footprint by approximately 17% to 57%, as compared to several similar FH Series HRS connectors.
2. Various contact pitch (0.4mm, 0.5mm, 1mm pitch) available
In addition to standard 0.5mm pitch, 0.4mm pitch, 1mm pitch also available.
3. Increased FPC/FFC retention force
-In the horizontal direction: Approximately 2.0 times (compared to 0.5mm pitch FH12 series.)
-In the vertical direction: Approximately 1.7 times (compared to 0.5mm pitch FH19 series.)
4. Conductive traces on the PCB can run under the connector
No exposed contacts on the bottom of the connector.
5. One finger operation of the actuator
Proven (in several other Hirose’s connectors) Flip-Lock® rotating actuator assures reliable mechanical and electrical connection with FPC/FFC, confirming it with a definite tactile feel.
6. Easy FPC insertion and reliable electrical connection
Proven Flip Lock actuator allows easy insertion of FPC/FFC and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection.
7. Accepts standard FPC thickness
0.3mm thick standard Flexible Printed Circuit (FPC) and Flexible Flat Cable (FFC) can be used.
8. Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Standard reel packaging contains 5000 connectors.
9. Halogen-free(FH33J Series)
As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum